Washington, Feb 1 (ANI): Industrial partners including renowned architects Foster + Partners have joined with ESA to test the feasibility of using 3D printing to build a lunar base from local materials.
"Terrestrial 3D printing technology has produced entire structures. Our industrial team investigated if it could similarly be employed to build a lunar habitat," said Laurent Pambaguian, heading the project for ESA.
Foster + Partners devised a weight-bearing 'catenary' dome design with a cellular structured wall to shield against micrometeoroids and space radiation, incorporating a pressurised inflatable to shelter astronauts.
A hollow closed-cell structure - reminiscent of bird bones - provides a good combination of strength and weight.
The base's design was guided in turn by the properties of 3D-printed lunar soil, with a 1.5 tonne building block produced as a demonstration.
"3D printing offers a potential means of facilitating lunar settlement with reduced logistics from Earth," added Scott Hovland of ESA's human spaceflight team.
"The new possibilities this work opens up can then be considered by international space agencies as part of the current development of a common exploration strategy," he added.
The UK's Monolite supplied the D-Shape printer, with a mobile printing array of nozzles on a 6 m frame to spray a binding solution onto a sand-like building material.
3D 'printouts' are built up layer by layer - the company more typically uses its printer to create sculptures and is working on artificial coral reefs to help preserve beaches from energetic sea waves.
"First, we needed to mix the simulated lunar material with magnesium oxide. This turns it into 'paper' we can print with," explained Monolite founder Enrico Dini.
"Then for our structural 'ink' we apply a binding salt which converts material to a stone-like solid. Our current printer builds at a rate of around 2 m per hour, while our next-generation design should attain 3.5 m per hour, completing an entire building in a week," he added. (ANI)